Global Index (short | long) | Local contents | Local Index (short | long)
[lat,lon] = maptrimp(lat0,lon0,latlim,lonlim)
MAPTRIMP Trims a patch map to a specified region [lat,lon] = MAPTRIMP(lat0,lon0,latlim,lonlim) trims a patch map to a region specified by latlim and lonlim. Latlim and lonlim are two element vectors, defining the latitude and longitude limits respectively. The inputs lat0 and lon0 must be vectors representing patch map vector data. See also MAPTRIMS, MAPTRIML
function [lat,lon] = maptrimp(lat0,lon0,latlim,lonlim)
% Copyright 1996-1998 by Systems Planning and Analysis, Inc. and The MathWorks, Inc.
% Written by: E. Byrns, E. Brown
% $Revision: 1.7 $ $Date: 1998/08/10 17:47:53 $
if nargin < 4; error('Incorrect number of arguments'); end
% Test the inputs
if ~isequal(sort(size(latlim)),sort(size(lonlim)),[1 2])
error('Lat and lon limit inputs must be 2 element vectors')
end
% Test for real inputs
if any([~isreal(lat0) ~isreal(lon0) ~isreal(latlim) ~isreal(lonlim)])
warning('Imaginary parts of complex arguments ignored')
lat0 = real(lat0); lon0 = real(lon0);
latlim = real(latlim); lonlim = real(lonlim);
end
% Get the corners of the submap region
up = max(latlim); low = min(latlim);
right = max(lonlim); left = min(lonlim);
% Copy the input data and ensure column vectors.
lat = lat0(:); lon = lon0(:);
% Get the vector of patch items and remove any NaN padding
% at the beginning or end of the column. This eliminates potential
% multiple NaNs at the beginning and end of the patches.
while isnan(lat(1)) | isnan(lon(1))
lat(1) = []; lon(1) = [];
end
while isnan(lat(length(lat))) | isnan(lon(length(lon)));
lat(length(lat)) = []; lon(length(lon)) = [];
end
% Add a NaN to the end of the data vector. Necessary for processing
% of multiple patches.
lat(length(lat)+1) = NaN; lon(length(lon)+1) = NaN;
% Find the individual patches and then trim the data
indx = find(isnan(lon) | isnan(lat));
if isempty(indx); indx = length(lon)+1; end
for i = 1:length(indx)
% hello(i)
if i == 1; startloc = 1;
else; startloc = indx(i-1)+1;
end
endloc = indx(i)-1;
indices = (startloc:endloc)'; % Indices will be empty if NaNs are
% neighboring in the vector data.
if ~isempty(indices) % Should not happen, but test just in case
% Patches which lie completely outside the trim window. Replace
% with NaNs and then eliminate it entirely later. Replacing with
% NaNs is useful so that the indexing with indices is not messed
% up if an entire patch is eliminated at this point.
% If at least one point of the patch edge does not lie with the
% specified window limits, then the entire patch is trimmed.
if ~any(lon(indices) >= left & lon(indices) <= right & ...
lat(indices) >= low & lat(indices) <= up)
lon(indices) = NaN; lat(indices) = NaN;
end
% Need to only test along edge since patch must lie somehow within the window.
% Points off the left
loctn = find( lon(indices) < left );
if ~isempty(loctn);
lon(indices(loctn)) = left;
ind2 = find(diff(loctn)~=1);
ind2 = [0; ind2; length(loctn)];
for ii = 1:(length(ind2)-1);
ind3 = indices(loctn((ind2(ii)+1):ind2(ii+1)));
if length(ind3) ~= 1;
dlat = (lat(ind3(1))-lat(ind3(length(ind3))))/...
(length(ind3)-1);
if dlat
lat(ind3) = lat(ind3(1)):-dlat:lat(ind3(length(ind3)));
else
lat(ind3) = lat(ind3(1));
end
else
lat(ind3) = lat(ind3(1));
end
end
end
% Points off the right
loctn = find( lon(indices) > right );
if ~isempty(loctn);
% hello(i)
lon(indices(loctn)) = right;
ind2 = find(diff(loctn)~=1);
ind2 = [0; ind2; length(loctn)];
for ii = 1:(length(ind2)-1);
ind3 = indices(loctn((ind2(ii)+1):ind2(ii+1)));
if length(ind3) ~= 1;
dlat = (lat(ind3(1))-lat(ind3(length(ind3))))/...
(length(ind3)-1);
if dlat
lat(ind3) = lat(ind3(1)):-dlat:lat(ind3(length(ind3)));
else
lat(ind3) = lat(ind3(1));
end
else
lat(ind3) = lat(ind3(1));
end
end
end
% Points off the bottom
loctn = find( lat(indices) < low );
if ~isempty(loctn);
lat(indices(loctn)) = low;
ind2 = find(diff(loctn)~=1);
ind2 = [0; ind2; length(loctn)];
for ii = 1:(length(ind2)-1);
ind3 = indices(loctn((ind2(ii)+1):ind2(ii+1)));
if length(ind3) ~= 1;
dlon = (lon(ind3(1))-lon(ind3(length(ind3))))/...
(length(ind3)-1);
if dlon
lon(ind3) = lon(ind3(1)):-dlon:lon(ind3(length(ind3)));
else
lon(ind3) = lon(ind3(1));
end
else
lon(ind3) = lon(ind3(1));
end
end
end
% Points off the top
loctn = find( lat(indices) > up );
if ~isempty(loctn);
lat(indices(loctn)) = up;
ind2 = find(diff(loctn)~=1);
ind2 = [0; ind2; length(loctn)];
for ii = 1:(length(ind2)-1);
ind3 = indices(loctn((ind2(ii)+1):ind2(ii+1)));
if length(ind3) ~= 1;
dlon = (lon(ind3(1))-lon(ind3(length(ind3))))/...
(length(ind3)-1);
if dlon
lon(ind3) = lon(ind3(1)):-dlon:lon(ind3(length(ind3)));
else
lon(ind3) = lon(ind3(1));
end
else
lon(ind3) = lon(ind3(1));
end
end
end
end
end
% Eliminate multiple NaNs in the vector. Will occur if a patch
% lies entirely outside the window of interest.
if ~isempty(lat)
nanloc = isnan(lat); [r,c] = size(nanloc);
nanloc = find(nanloc(1:r-1,:) & nanloc(2:r,:));
lat(nanloc) = []; lon(nanloc) = [];
end